We calculate, design and manufacture quick-release fasteners for containers, reactors and pressure vessels. Depending on the requirements of the medium or customer, we select the type of sealing or the mechanics of the opening mechanism.
Empl Anlagen determines the safety equipment and specifies it or can procure it.
Acceptance and pre-testing by TÜV Süd or others.
Documentation: manufacturer’s declaration, test and documents, production documents, spare parts, hazard analysis, operating instructions.
We can supply the following sizes: Hand holes or manholes from DN50 to DN800 and container closures up to DN3000.
The flange ring is internally toothed, profiled and provided with a sealing groove. The seal type is an inflatable gasket which is pressurized with nitrogen or nitrogen. The cover, corresponding to the flange ring, has a corresponding toothed counterprofile, bayonet-like closable. Swing link with pivot point for holding the cover at the centrally welded trunnion. The rotary mechanism of the cover is to be operated with a hand lever.
The fuse unit consists of a locking pin, a 3-way ball valve for pressurizing the seal and a safety interlock switch. The quick-release fastener was manufactured in accordance with AD2000 information sheet A5 and approved by an expert from TÜV Süd Industrie Service GmbH.
Quick-Release Closure DN1200
Specifically designed to meet the demanding requirements of industrial applications.
This quick-release closure stands out for its innovative design:
- Hydraulic Operation: The lid is hydraulically lowered out of the clamping ring and then opened. This ensures safe and effortless product discharge.
- Technical Specifications:
- Pressure Resistance: Up to 40 bar
- Material: 1.4462 (Duplex) – highly durable and corrosion-resistant
- Explosion-Proof Compatibility: Safe operation in hazardous (EX) environments
- Interior Surface Finish: Polished to Ra < 0.8 µm for optimal hygiene and product quality
- Certifications: Designed in compliance with the Pressure Equipment Directive (PED) 2014/68/EU and AD 2000 standards (A5), certified by TÜV SÜD.
Interested? Get in touch with us today – we’d be happy to assist you!
Quick connector DN150 PN50
- Design data: 0 / + 50 bar
- Design temperature: 0 / + 250 ° C
- Load changes 16,000 / 10 years with a pressure fluctuation range of 35 bar and a temperature fluctuation range of 200 ° C
- Design according to AD2000
- Suitable for a standard flange DN 150 PN63 according to EN1092-1 DN 150 type 01 / type 11
- Material 1.4571
- Use in EX areas
Advantage:
- Very quick and easy opening of the quick release by simple operation of the key bar
- No screws and nuts required to open the quick release
- Maximum security thanks to the key bar, in addition to the pneumatic locking of the key bar and position queries
The design inspection and a final and pressure test were carried out by the TÜV.
CONTACT
Empl Anlagen GmbH & Co. KG
Behälter- und Apparatebau
Edelstahlverarbeitung
Auenstr. 11, 84419 Schwindegg
Tel.: + 49 80 82 – 93 59-0
Fax: + 49 80 82 – 93 59-20
Mail: info@empl-anlagen.de
IMAGE BROCHURE (PDF)
.
INFORMATION
CONCEPTION & DESIGN
geschmacksRaum® WERBEAGENTUR
Mühldorfer Str. 72, 84419 Schwindegg
www.geschmacksraum-werbeagentur.de